Specific lateral flow detection of isothermal nucleic acid amplicons for accurate point-of-care testing.

For point-of-care testing (POCT), coupling isothermal nucleic acid amplification schemes (e.g., recombinase polymerase amplification, RPA) with lateral flow assay (LFA) readout is an ideal platform, since such integration offers both high sensitivity and deployability. However, isothermal schemes typically suffers from non-specific amplification, which is difficult to be differentiated by LFA and thus results in false-positives. Here, we proposed an accurate POCT platform by specific recognition of target amplicons with peptide nucleic acid (PNA, assisted by T7 Exonuclease), which could be directly plugged into the existing RPA kits and commercial LFA test strips. With SARS-CoV-2 as the model, the proposed method (RPA-TeaPNA-LFA) efficiently eliminated the false-positives, exhibiting a lowest detection concentration of 6.7 copies/µL of RNA and 90 copies/µL of virus. Using dual-gene (orf1ab and N genes of SARS-CoV-2) as the targets, RPA-TeaPNA-LFA offered a high specificity (100%) and sensitivity (RT-PCR Ct < 31, 100%; Ct < 40, 71.4%), and is valuable for on-site screening or self-testing during isolation. In addition, the dual test lines in the test strips were successfully explored for simultaneous detection of SARS-CoV-2 and H1N1, showing great potential in response to future pathogen-based pandemics.

Rapid and Visual Detection of SARS-CoV-2 RNA Based on Reverse Transcription-Recombinase Polymerase Amplification with Closed Vertical Flow Visualization Strip Assay.

Coronavirus disease 2019 (COVID-19), which is caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), was initially identified in 2019, after which it spread rapidly throughout the world. With the progression of the epidemic, new variants of SARS-CoV-2 with faster transmission speeds and higher infectivity have constantly emerged. The proportions of people asymptomatically infected or reinfected after vaccination have increased correspondingly, making the prevention and control of COVID-19 extremely difficult. There is therefore an urgent need for rapid, convenient, and inexpensive detection methods. In this paper, we established a nucleic acid visualization assay targeting the SARS-CoV-2 nucleoprotein (N) gene by combining reverse transcription-recombinase polymerase amplification with closed vertical flow visualization strip (RT-RPA-VF). This method had high sensitivity, comparable to that of reverse transcription-quantitative PCR (RT-qPCR), and the concordance between RT-RPA-VF and RT-qPCR methods was 100%. This detection method is highly specific and is not compatible with bat coronavirus HKU4, human coronaviruses 229E, OC43, and HKU1-CoV, Middle East respiratory syndrome coronavirus (MERS-CoV), or other respiratory pathogens. However, multiple SARS-CoV-2 variants are detectable within 25 min at 42°C using this visual method, including RNA transcripts of the Wuhan-Hu-1 strain at levels as low as 1 copy/µL, the Delta strain at 1 copy/µL, and the Omicron strain at 0.77 copies/µL. The RT-RPA-VF method is a simple operation for the rapid diagnosis of COVID-19 that is safe and free from aerosol contamination and could be an affordable and attractive choice for governments seeking to promote their emergency preparedness and better their responses to the continuing COVID-19 epidemic. In addition, this method also has great potential for early monitoring and warning of the epidemic situation at on-site-nursing points. IMPORTANCE The global COVID-19 epidemic, ongoing since the initial outbreak in 2019, has caused panic and huge economic losses worldwide. Due to the continuous emergence of new variants, COVID-19 has been responsible for a higher proportion of asymptomatic patients than the previously identified SARS and MERS, which makes early diagnosis and prevention more difficult. In this manuscript, we describe a rapid, sensitive, and specific detection tool, RT-RPA-VF. This tool provides a new alternative for the detection of SARS-CoV-2 variants in a range as low as 1 to 0.77 copies/µL RNA transcripts. RT-RPA-VF has great potential to ease the pressure of medical diagnosis and the accurate identification of patients with suspected COVID-19 at point-of-care.

Recent advances in recombinase polymerase amplification: Principle, advantages, disadvantages and applications.

After the outbreak of SARS-CoV-2, nucleic acid testing quickly entered people's lives. In addition to the polymerase chain reaction (PCR) which was commonly used in nucleic acid testing, isothermal amplification methods were also important nucleic acid testing methods. Among several common isothermal amplification methods like displaced amplification, rolling circle amplification, and so on, recombinase polymerase amplification (RPA) was recently paid more attention to. It had the advantages like a simple operation, fast amplification speed, and reaction at 37-42°C, et al. So it was very suitable for field detection. However, there were still some disadvantages to RPA. Herein, our review mainly summarized the principle, advantages, and disadvantages of RPA. The specific applications of RPA in bacterial detection, fungi detection, virus detection, parasite detection, drug resistance gene detection, genetically modified food detection, and SARS-CoV-2 detection were also described. It was hoped that the latest research progress on RPA could be better delivered to the readers who were interested in RPA.

Real-Time Reverse Transcription Recombinase-Aided Amplification Assay for Rapid Amplification of the N Gene of SARS-CoV-2.

COVID-19 was officially declared a global pandemic disease on 11 March 2020, with severe implications for healthcare systems, economic activity, and human life worldwide. Fast and sensitive amplification of the severe acute respiratory syndrome virus 2 (SARS-CoV-2) nucleic acids is critical for controlling the spread of this disease. Here, a real-time reverse transcription recombinase-aided amplification (RT-RAA) assay, targeting conserved positions in the nucleocapsid protein gene (N gene) of SARS-CoV-2, was successfully established for SARS-CoV-2. The assay was specific to SARS-CoV-2, and there was no cross-reaction with other important viruses. The sensitivity of the real-time RT-RAA assay was 142 copies per reaction at 95% probability. Furthermore, 100% concordance between the real-time RT-RAA and RT-qPCR assays was achieved after testing 72 clinical specimens. Further linear regression analysis indicated a significant correlation between the real-time RT-RAA and RT-qPCR assays with an R2 value of 0.8149 (p < 0.0001). In addition, the amplicons of the real-time RT-RAA assay could be directly visualized by a portable blue light instrument, making it suitable for the rapid amplification of SARS-CoV-2 in resource-limited settings. Therefore, the real-time RT-RAA method allows the specific, sensitive, simple, rapid, and reliable detection of SARS-CoV-2.

A nucleic acid detection assay combining reverse transcription recombinase-aided amplification with a lateral flow dipstick for the rapid visual detection of porcine deltacoronavirus.

Porcine deltacoronavirus (PDCoV) is an emerging enteropathogen causing severe diarrhoea, dehydration, and death in nursing piglets and enormous economic losses for the global swine industry. Furthermore, it can infect multiple animal species including humans. Therefore, a rapid, definitive diagnostic assay is required for the effective control of this zoonotic pathogen. To identify PDCoV, we developed a nucleic acid detection assay combining reverse transcription recombinase-aided amplification (RT-RAA) with a lateral flow dipstick (LFD) targeting the highly conserved genomic region in the ORF1b gene. The RT-RAA-LFD assay exhibited good PDCoV detection reproducibility and repeatability and could be completed within 11 min. Ten minutes at 40 °C was required for nucleic acid amplification and 1 min at room temperature was needed for the visual LFD readout. The assay specifically detected PDCoV and did not cross-react with any other major swine pathogens. The 95% limit of detection (LOD) was 3.97 median tissue culture infectious dose PDCoV RNA per reaction. This performance was comparable to that of a reference TaqMan-based real-time RT-PCR (trRT-PCR) assay for PDCoV. Of 149 swine small intestine, rectal swab, and serum samples, 71 and 75 tested positive for PDCoV according to RT-RAA-LFD and trRT-PCR, respectively. The diagnostic coincidence rate for both assays was 97.32% (145/149) and the kappa value was 0.946 (p < 0.001). Overall, the RT-RAA-LFD assay is a user-friendly diagnostic tool that can rapidly and visually detect PDCoV.

Photocontrolled crRNA activation enables robust CRISPR-Cas12a diagnostics.

CRISPR diagnostics based on nucleic acid amplification faces barriers to its commercial use, such as contamination risks and insufficient sensitivity. Here, we propose a robust solution involving optochemical control of CRISPR RNA (crRNA) activation in CRISPR detection. Based on this strategy, recombinase polymerase amplification (RPA) and CRISPR-Cas12a detection systems can be integrated into a completely closed test tube. crRNA can be designed to be temporarily inactivated so that RPA is not affected by Cas12a cleavage. After the RPA reaction is completed, the CRISPR-Cas12a detection system is activated under rapid light irradiation. This photocontrolled, fully closed CRISPR diagnostic system avoids contamination risks and exhibits a more than two orders of magnitude improvement in sensitivity compared with the conventional one-pot assay. This photocontrolled CRISPR method was applied to the clinical detection of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) RNA, achieving detection sensitivity and specificity comparable to those of PCR. Furthermore, a compact and automatic photocontrolled CRISPR detection device was constructed.

Visualized Genotyping from "Sample to Results" Within 25 Minutes by Coupling Recombinase Polymerase Amplification (RPA) With Allele-Specific Invasive Reaction Assisted Gold Nanoparticle Probes Assembling.

A simple and rapid genotyping method with less-instrumentation is essential for realizing point-of-care detection of personalized medicine-related gene biomarkers. Herein, we developed a rapid and visualized genotyping method by coupling recombinase polymerase amplification (RPA) with allele-specific invader reaction assisted gold nanoparticle probes assembling. In the method, the DNA targets were firstly amplified by using RPA, which is a rapid isothermal amplification technology. Then an allele-specific invasion reaction was performed to recognize the single nucleotide polymorphisms (SNPs) site in the amplicons, to produce signal molecules that caused discoloration of gold nanoparticle probes. As a result, genotyping was achieved by observing the color change of the reaction by using naked eye without the requirement for any expensive instrument. In order to achieve rapid genotyping detection, the genomic DNA from oral swab lysate samples were used for the RPA templates amplification. In this way, a visualized genotyping from "samples to results" within 25 min was realized. Two clopidogrel related SNPs CYP2C19*2 and CYP2C19*3 of 56 clinical samples were correctly genotyped by using this rapid visualized genotyping assay. In addition, the feasibility for this pathogen genotyping method was also verified by detecting plasmid DNA containing three SARS-COV-2 gene mutation sites, indicating that this method has the potential for clinical sample detection.

Visual detection of porcine epidemic diarrhea virus by recombinase polymerase amplification combined with lateral flow dipstrip.

BACKGROUND: Porcine epidemic diarrhea virus (PEDV) is one of the most important enteric viruses causing diarrhea in pigs. The establishment of a rapid detection method applicable in field conditions will be conducive to early detection of pathogen and implementation of relevant treatment. A novel nucleic acid amplification method, recombinase polymerase amplification (RPA), has been widely used for infectious disease diagnosis. RESULTS: In the present study, a reverse transcription (RT)-RPA assay combined with lateral flow dipstrip (LFD) was established for the visual detection of PEDV by targeting the N gene. The RT-RPA-LFD assay detected as low as 102 copies/µL of PEDV genomic RNA standard. Moreover, the novel RT-RPA-LFD assay did not show cross-reactivity with common swine pathogens, demonstrating high specificity. The performance of the assay for detection of clinical samples was also evaluated. A total number of 86 clinical samples were tested by RT-RPA-LFD and RT-PCR. The detection results of RT-RPA-LFD were compared with those of RT-PCR, with a coincidence rate of 96.5%. CONCLUSION: The newly established RT-RPA-LFD assay in our study had high sensitivity and specificity, with a potential to use in resource-limited areas and countries.

Fabrication of Wearable PDMS Device for Rapid Detection of Nucleic Acids via Recombinase Polymerase Amplification Operated by Human Body Heat.

Pathogen detection by nucleic acid amplification proved its significance during the current coronavirus disease 2019 (COVID-19) pandemic. The emergence of recombinase polymerase amplification (RPA) has enabled nucleic acid amplification in limited-resource conditions owing to the low operating temperatures around the human body. In this study, we fabricated a wearable RPA microdevice using poly(dimethylsiloxane) (PDMS), which can form soft-but tight-contact with human skin without external support during the body-heat-based reaction process. In particular, the curing agent ratio of PDMS was tuned to improve the flexibility and adhesion of the device for better contact with human skin, as well as to temporally bond the microdevice without requiring further surface modification steps. For PDMS characterization, water contact angle measurements and tests for flexibility, stretchability, bond strength, comfortability, and bendability were conducted to confirm the surface properties of the different mixing ratios of PDMS. By using human body heat, the wearable RPA microdevices were successfully applied to amplify 210 bp from Escherichia coli O157:H7 (E. coli O157:H7) and 203 bp from the DNA plasmid SARS-CoV-2 within 23 min. The limit of detection (LOD) was approximately 500 pg/reaction for genomic DNA template (E. coli O157:H7), and 600 fg/reaction for plasmid DNA template (SARS-CoV-2), based on gel electrophoresis. The wearable RPA microdevice could have a high impact on DNA amplification in instrument-free and resource-limited settings.

Combining recombinase polymerase amplification and DNA-templated reaction for SARS-CoV-2 sensing with dual fluorescence and lateral flow assay output.

The early phase of the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) pandemic was exacerbated by a diagnostic challenge of unprecedented magnitude. In the absence of effective therapeutics or vaccines, breaking the chain of transmission through early disease detection and patient isolation was the only means to control the growing pandemic. While polymerase chain reaction (PCR)-based methods and rapid-antigen tests rose to the occasion, the analytical challenge of rapid and sequence-specific nucleic acid-sensing at a point-of-care or home setting stimulated intense developments. Herein we report a method that combines recombinase polymerase amplification and a DNA-templated reaction to achieve a dual readout with either fluorescence (microtiter plate) or naked eye (lateral flow assay: LFA) detection. The nucleic acid templated reaction is based on an SN Ar that simultaneously transfers biotin from one Peptide Nucleic Acid (PNA) strand to another PNA strand, enabling LFA detection while uncaging a coumarin for fluorescence readout. This methodology has been applied to the detection of a DNA or RNA sequence uniquely attributed to the SARS-CoV-2.

Integrating Reverse Transcription Recombinase Polymerase Amplification with CRISPR Technology for the One-Tube Assay of RNA.

CRISPR-Cas systems integrated with nucleic acid amplification techniques improve both analytical specificity and sensitivity. We describe here issues and solutions for the successful integration of reverse transcription (RT), recombinase polymerase amplification (RPA), and CRISPR-Cas12a nuclease reactions into a single tube under an isothermal condition (40 °C). Specific detection of a few copies of a viral DNA sequence was achieved in less than 20 min. However, the sensitivity was orders of magnitude lower for the detection of viral RNA due to the slow initiation of RPA when the complementary DNA (cDNA) template remained hybridized to RNA. During the delay of RPA, the crRNA-Cas12a ribonucleoprotein (RNP) gradually lost its activity in the RPA solution, and nonspecific amplification reactions consumed the RPA reagents. We overcame these problems by taking advantage of the endoribonuclease function of RNase H to remove RNA from the RNA-cDNA hybrids and free the cDNA as template for the RPA reaction. As a consequence, we significantly enhanced the overall reaction rate of an integrated assay using RT-RPA and CRISPR-Cas12a for the detection of RNA. We showed successful detection of 200 or more copies of the S gene sequence of SARS-CoV-2 RNA within 5-30 min. We applied our one-tube assay to 46 upper respiratory swab samples for COVID-19 diagnosis, and the results from both fluorescence intensity measurements and end-point visualization were consistent with those of RT-qPCR analysis. The strategy and technique improve the sensitivity and speed of RT-RPA and CRISPR-Cas12a assays, potentially useful for both semi-quantitative and point-of-care analyses of RNA molecules.

Harnessing recombinase polymerase amplification for rapid multi-gene detection of SARS-CoV-2 in resource-limited settings.

The COVID-19 pandemic is challenging diagnostic testing capacity worldwide. The mass testing needed to limit the spread of the virus requires new molecular diagnostic tests to dramatically widen access at the point-of-care in resource-limited settings. Isothermal molecular assays have emerged as a promising technology, given the faster turn-around time and minimal equipment compared to gold standard laboratory PCR methods. However, unlike PCR, they do not typically target multiple SARS-CoV-2 genes, risking sensitivity and specificity. Moreover, they often require multiple steps thus adding complexity and delays. Here we develop a multiplexed, 1-2 step, fast (20-30 min) SARS-CoV-2 molecular test using reverse transcription recombinase polymerase amplification to simultaneously detect two conserved targets - the E and RdRP genes. The agile multi-gene platform offers two complementary detection methods: real-time fluorescence or dipstick. The analytical sensitivity of the fluorescence test was 9.5 (95% CI: 7.0-18) RNA copies per reaction for the E gene and 17 (95% CI: 11-93) RNA copies per reaction for the RdRP gene. The analytical sensitivity for the dipstick method was 130 (95% CI: 82-500) RNA copies per reaction. High specificity was found against common seasonal coronaviruses, SARS-CoV and MERS-CoV model samples. The dipstick readout demonstrated potential for point-of-care testing in decentralised settings, with minimal or equipment-free incubation methods and a user-friendly prototype smartphone application. This rapid, simple, ultrasensitive and multiplexed molecular test offers valuable advantages over gold standard tests and in future could be configurated to detect emerging variants of concern.

A microfluidic-integrated lateral flow recombinase polymerase amplification (MI-IF-RPA) assay for rapid COVID-19 detection.

The COVID-19 pandemic, caused by SARS-CoV-2, currently poses an urgent global medical crisis for which there remains a lack of affordable point-of-care testing (POCT). In particular, resource-limited areas need simple and easily disseminated testing solutions to manage the outbreak. In this work, a microfluidic-integrated lateral flow recombinase polymerase amplification (MI-IF-RPA) assay was developed for rapid and sensitive detection of SARS-CoV-2, which integrates the reverse transcription recombinase polymerase amplification (RT-RPA) and a universal lateral flow (LF) dipstick detection system into a single microfluidic chip. The single-chamber RT-RPA reaction components are mixed with running buffer, and then delivered to the LF detection strips for biotin- and FAM-labelled amplified analyte sequences, which can provide easily interpreted positive or negative results. Testing requires only a simple nucleic acid extraction and loading, then incubation to obtain results, approximately 30 minutes in total. SARS-CoV-2 armored RNA particles were used to validate the MI-IF-RPA system, which showed a limit of detection of 1 copy per µL, or 30 copies per sample. Chip performance was further evaluated using clinically diagnosed cases of COVID-19 and revealed a sensitivity of 97% and specificity of 100%, highly comparable to current reverse transcription-polymerase chain reaction (RT-PCR)-based diagnostic assays. This MI-IF-RPA assay is portable and comprises affordable materials, enabling mass production and decreased risk of contamination. Without the need for specialized instrumentation and training, MI-IF-RPA assay can be used as a complement to RT-PCR for low-cost COVID-19 screening in resource-limited areas.

Development of a reverse transcription recombinase polymerase amplification assay for rapid and direct visual detection of Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2).

Rapid diagnosis is an important intervention in managing the Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) outbreak. Real time reverse transcription polymerase chain reaction (RT-qPCR) remains the primary means for diagnosing the new virus strain but it is time consuming and costly. Recombinase polymerase amplification (RPA) is an isothermal amplification assay that does not require a PCR machine. It is an affordable, rapid, and simple assay. In this study, we developed and optimized a sensitive reverse transcription (RT)-RPA assay for the rapid detection of SARS-CoV-2 using SYBR Green I and/or lateral flow (LF) strip. The analytical sensitivity and specificity of the RT-RPA assay were tested by using 10-fold serial diluted synthetic RNA and genomic RNA of similar viruses, respectively. Clinical sensitivity and specificity of the RT-RPA assay were carried out using 78 positive and 35 negative nasopharyngeal samples. The detection limit of both RPA and RT-qPCR assays was 7.659 and 5 copies/µL RNA, respectively with no cross reactivity with other viruses. The clinical sensitivity and specificity of RT-RPA were 98% and 100%, respectively. Our study showed that RT-RPA represents a viable alternative to RT-qPCR for the detection of SARS-CoV-2, especially in areas with limited infrastructure.